How to choose the planetary reducer model? The following Shunli planetary reducer manufacturers Xiaobian to give you a detailed introduction.

First, when selecting a planetary reducer, first determine the reduction ratio.

Secondly, after determining the reduction ratio, please multiply the rated torque of the selected servo motor by the reduction ratio. The obtained value is in principle smaller than the rated output torque of the similar reducer provided on the product catalog, and also consider the drive motor. Overload capability and maximum working torque required in practice. The maximum working torque required is less than 2 times the rated output torque. After satisfying the above conditions, please select the smallest volume deceleration, and the small size reducer costs relatively low.

Then consider the return gap of the planetary reducer. The smaller the backlash, the higher the accuracy and the higher the cost. The user has to choose a gearbox that meets the accuracy requirements of the series. Also consider lateral/radial forces and average life. The reducer with large lateral/radial force is highly reliable in installation and use, and it is not easy to cause problems. Usually the average life is much longer than the life of the servo motor.

Finally, we must also consider the weight of the motor. A type of reducer is only allowed to be matched with a motor of less than a certain weight. The motor is too heavy, and long-term operation will damage the input flange of the reducer.

The above is the introduction of how to choose the planetary reducer model, I hope to help friends in need, if you want to know more about the planetary reducer, please continue to pay attention to the Shunli planetary reducer.